Americas - Pacific Northwest - ID, OR, WA

 View Only
Back to discussions
Expand all | Collapse all

Are there any custom manufacturers in this group using Epicor?

  • 1.  Are there any custom manufacturers in this group using Epicor?

    Posted 02-05-2017 05:39 PM

    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect?  We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 2.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 03:38 AM
    We are a design-engineer-to-order manufacturer. We struggle with the design-development process and the BOM not fully defined prior to beginning the manufacturing process. Also, our design can fluctuate well into manufacturing.

    I’m available for a discussion, it might assist us both!


    Jeff Foster
    IT Manager
    TTF Aerospace
    P: 253.736.6320 F: 253.520.6835 C: 253.225.6667
    4620 B St NW Suite 101
    Auburn, WA 98001
    www.ttfaero.comhttp://www.ttfaero.com



    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Sunday, February 05, 2017 9:39 PM
    To: PAC-NW_List@list.epicorusers.org
    Subject: [PAC-NW_List] - Are there any custom manufacturers in this group using Epicor?


    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect? We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 3.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 03:53 AM
    We are pretty near a dead ringer for what Jeff explained below including BOM and full drawing release issues prior to beginning the mfg process. We are working around it effectively for now, but are certainly looking for methods to improve. Jumping in on that discussion might be beneficial for me as well. An initial conference call perhaps then I’d likely include our Planner and Sr. Engineer.


    Jared Hundrup

    CFO


    GROUND FORCE MFG | UNDERGROUND FORCE
    5650 E. Seltice Way Post Falls, ID 83854 U.S.A.
    Tel: 1-208-664-9291 | Fax: 1-208-664-9475
    Email: jhundrup@gfworldwide.com<mailto:%20jhundrup@gfworldwide.com> | www.gfworldwide.comhttp://www.gfworldwide.com

    From: Jeff Foster [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 7:38 AM
    To: 'pac-nw_list@list.epicorusers.org' <pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    We are a design-engineer-to-order manufacturer. We struggle with the design-development process and the BOM not fully defined prior to beginning the manufacturing process. Also, our design can fluctuate well into manufacturing.

    I’m available for a discussion, it might assist us both!


    Jeff Foster
    IT Manager
    TTF Aerospace
    P: 253.736.6320 F: 253.520.6835 C: 253.225.6667
    4620 B St NW Suite 101
    Auburn, WA 98001
    www.ttfaero.comhttp://www.ttfaero.com



    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Sunday, February 05, 2017 9:39 PM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - Are there any custom manufacturers in this group using Epicor?


    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect? We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 4.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 06:34 AM
    I’d like in on this conversation too. This is the definition of one of our big problems.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Jeff Foster [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 7:38 AM
    To: 'pac-nw_list@list.epicorusers.org'
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    We are a design-engineer-to-order manufacturer. We struggle with the design-development process and the BOM not fully defined prior to beginning the manufacturing process. Also, our design can fluctuate well into manufacturing.

    I’m available for a discussion, it might assist us both!


    Jeff Foster
    IT Manager
    TTF Aerospace
    P: 253.736.6320 F: 253.520.6835 C: 253.225.6667
    4620 B St NW Suite 101
    Auburn, WA 98001
    www.ttfaero.comhttp://www.ttfaero.com



    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Sunday, February 05, 2017 9:39 PM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - Are there any custom manufacturers in this group using Epicor?


    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect? We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 5.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 07:18 AM
    I'd love to join in on this discussion as well! 50% of our business is custom fabricated and our manufacturing process starts well ahead of a the completed BOM in Vista. The company had operated like this for years but we are trying to find other best practices used by other companies in addition to continuing on the path to solving the problem eventually.

    Rachel Camarillo
    Controller
    North Star Ice Equipment

    ________________________________
    From: Garrett Mark <pac-nw_list@list.epicorusers.org>
    Sent: Tuesday, February 7, 2017 10:34:10 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I’d like in on this conversation too. This is the definition of one of our big problems.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Jeff Foster [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 7:38 AM
    To: 'pac-nw_list@list.epicorusers.org'
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    We are a design-engineer-to-order manufacturer. We struggle with the design-development process and the BOM not fully defined prior to beginning the manufacturing process. Also, our design can fluctuate well into manufacturing.

    I’m available for a discussion, it might assist us both!


    Jeff Foster
    IT Manager
    TTF Aerospace
    P: 253.736.6320 F: 253.520.6835 C: 253.225.6667
    4620 B St NW Suite 101
    Auburn, WA 98001
    www.ttfaero.comhttp://www.ttfaero.com



    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Sunday, February 05, 2017 9:39 PM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - Are there any custom manufacturers in this group using Epicor?


    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect? We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 6.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 07:26 AM
    Hello,

    I would like to be involved as well. I haven't been active in the usersgroup, so how does it typically work? Conference calls? Email threads? Who leads these conversations?

    Thank you,

    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Rachel Camarillo [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 11:18 AM
    To: pac-nw_list@list.epicorusers.org; pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I'd love to join in on this discussion as well! 50% of our business is custom fabricated and our manufacturing process starts well ahead of a the completed BOM in Vista. The company had operated like this for years but we are trying to find other best practices used by other companies in addition to continuing on the path to solving the problem eventually.
    Rachel Camarillo
    Controller
    North Star Ice Equipment

    ________________________________
    From: Garrett Mark <pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>>
    Sent: Tuesday, February 7, 2017 10:34:10 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I'd like in on this conversation too. This is the definition of one of our big problems.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Jeff Foster [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 7:38 AM
    To: 'pac-nw_list@list.epicorusers.org'
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    We are a design-engineer-to-order manufacturer. We struggle with the design-development process and the BOM not fully defined prior to beginning the manufacturing process. Also, our design can fluctuate well into manufacturing.

    I'm available for a discussion, it might assist us both!


    Jeff Foster
    IT Manager
    TTF Aerospace
    P: 253.736.6320 F: 253.520.6835 C: 253.225.6667
    4620 B St NW Suite 101
    Auburn, WA 98001
    www.ttfaero.comhttp://www.ttfaero.com



    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Sunday, February 05, 2017 9:39 PM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - Are there any custom manufacturers in this group using Epicor?


    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect? We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 7.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 07:28 AM
    I am also unfamiliar with how these work. Roundtable with beers so optimal to me, but conference call probably would work best.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Tony Holiday [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 11:26 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Hello,

    I would like to be involved as well. I haven't been active in the usersgroup, so how does it typically work? Conference calls? Email threads? Who leads these conversations?

    Thank you,

    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Rachel Camarillo [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 11:18 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>; pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I'd love to join in on this discussion as well! 50% of our business is custom fabricated and our manufacturing process starts well ahead of a the completed BOM in Vista. The company had operated like this for years but we are trying to find other best practices used by other companies in addition to continuing on the path to solving the problem eventually.
    Rachel Camarillo
    Controller
    North Star Ice Equipment

    ________________________________
    From: Garrett Mark <pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>>
    Sent: Tuesday, February 7, 2017 10:34:10 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I'd like in on this conversation too. This is the definition of one of our big problems.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Jeff Foster [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 7:38 AM
    To: 'pac-nw_list@list.epicorusers.org'
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    We are a design-engineer-to-order manufacturer. We struggle with the design-development process and the BOM not fully defined prior to beginning the manufacturing process. Also, our design can fluctuate well into manufacturing.

    I'm available for a discussion, it might assist us both!


    Jeff Foster
    IT Manager
    TTF Aerospace
    P: 253.736.6320 F: 253.520.6835 C: 253.225.6667
    4620 B St NW Suite 101
    Auburn, WA 98001
    www.ttfaero.comhttp://www.ttfaero.com



    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Sunday, February 05, 2017 9:39 PM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - Are there any custom manufacturers in this group using Epicor?


    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect? We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 8.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 07:28 AM
    I would love to be taken off this group chat as this doesn't apply to us.

    Thank you.

    From: Tony Holiday [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 11:26 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Hello,

    I would like to be involved as well. I haven't been active in the usersgroup, so how does it typically work? Conference calls? Email threads? Who leads these conversations?

    Thank you,

    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Rachel Camarillo [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 11:18 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>; pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I'd love to join in on this discussion as well! 50% of our business is custom fabricated and our manufacturing process starts well ahead of a the completed BOM in Vista. The company had operated like this for years but we are trying to find other best practices used by other companies in addition to continuing on the path to solving the problem eventually.
    Rachel Camarillo
    Controller
    North Star Ice Equipment

    ________________________________
    From: Garrett Mark <pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>>
    Sent: Tuesday, February 7, 2017 10:34:10 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I'd like in on this conversation too. This is the definition of one of our big problems.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Jeff Foster [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 7:38 AM
    To: 'pac-nw_list@list.epicorusers.org'
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    We are a design-engineer-to-order manufacturer. We struggle with the design-development process and the BOM not fully defined prior to beginning the manufacturing process. Also, our design can fluctuate well into manufacturing.

    I'm available for a discussion, it might assist us both!


    Jeff Foster
    IT Manager
    TTF Aerospace
    P: 253.736.6320 F: 253.520.6835 C: 253.225.6667
    4620 B St NW Suite 101
    Auburn, WA 98001
    www.ttfaero.comhttp://www.ttfaero.com



    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Sunday, February 05, 2017 9:39 PM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - Are there any custom manufacturers in this group using Epicor?


    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect? We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 9.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 07:38 AM
    Hello Everyone:

    Generally speaking, the ETO process is facilitated/managed by a PDM or PLM system depending on the size and complexity. PDM and PLM bring the CAD system (e.g. SolidWorks), engineering process and ERP together.

    I would be happy to set up a conference call next week to discuss further.

    Kyle Cannon
    Sr. Customer Account Manager
    O: 949.585.4347
    M: 949.444.8687<tel:949.444.8687>
    E-Mail: kcannon@epicor.com<mailto:kcannon@epicor.com>
    www.epicor.comhttp://www.epicor.com


    From: Garrett Mark [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 7, 2017 11:28 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I am also unfamiliar with how these work. Roundtable with beers so optimal to me, but conference call probably would work best.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Tony Holiday [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 11:26 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Hello,

    I would like to be involved as well. I haven't been active in the usersgroup, so how does it typically work? Conference calls? Email threads? Who leads these conversations?

    Thank you,

    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Rachel Camarillo [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 11:18 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>; pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I'd love to join in on this discussion as well! 50% of our business is custom fabricated and our manufacturing process starts well ahead of a the completed BOM in Vista. The company had operated like this for years but we are trying to find other best practices used by other companies in addition to continuing on the path to solving the problem eventually.
    Rachel Camarillo
    Controller
    North Star Ice Equipment

    ________________________________
    From: Garrett Mark <pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>>
    Sent: Tuesday, February 7, 2017 10:34:10 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I'd like in on this conversation too. This is the definition of one of our big problems.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Jeff Foster [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 07, 2017 7:38 AM
    To: 'pac-nw_list@list.epicorusers.org'
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    We are a design-engineer-to-order manufacturer. We struggle with the design-development process and the BOM not fully defined prior to beginning the manufacturing process. Also, our design can fluctuate well into manufacturing.

    I'm available for a discussion, it might assist us both!


    Jeff Foster
    IT Manager
    TTF Aerospace
    P: 253.736.6320 F: 253.520.6835 C: 253.225.6667
    4620 B St NW Suite 101
    Auburn, WA 98001
    www.ttfaero.comhttp://www.ttfaero.com



    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Sunday, February 05, 2017 9:39 PM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - Are there any custom manufacturers in this group using Epicor?


    Are there any custom manufacturers in this group using Epicor for your jobs? If so, can we connect? We are having issues with getting Epicor to work for us in our custom manufacturing section and would like to know how you have solved the linear function/limitation of the jobs/workorders.



  • 10.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 08:39 AM

    Kyle,

    Thank you so much for setting up the conference call.  Can I propose Wed Feb 15 9am PST or sometime in the morning?

    Brenda



  • 11.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 10:56 AM
    If you invite me, I’d be happy to join the call. I might be able to provide some creative thinking or at give least some assistance with facilitating help through the EUG.


    JENNIFER MESIANO
    President
    [9a885f_14a8cc8798524c6198f25fb51f871382-mv2]

    Mobile: 210-740-5942
    www.singularcs.comhttp://www.singularcs.com



    [CIOReview]


    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Tuesday, February 7, 2017 2:39 PM
    To: PAC-NW_List@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Kyle,

    Thank you so much for setting up the conference call. Can I propose Wed Feb 15 9am PST or sometime in the morning?

    Brenda



  • 12.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-07-2017 11:57 AM

    I would like to participate in the call.   We engineer various machines and automation systems for assembling aircraft.  Definitely all custom and low volume but very large with incredibly complicated many level BoMs.  Thousands of assemblies nested up to 10-20 levels deep.  In particular I'm looking at how using Projects might simplify some of this.  If anyone is using Projects for very large custom deliverable products and have Jobs rolling up within the project I would be very interested in how well that works - or not.

    Thanks,
    Todd Caughey
    Epicor ERP 10 Evangelist
    Electroimpact, Inc.
    Mukilteo, WA



  • 13.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-10-2017 05:27 AM

    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST?  Please confirm your attendance.

    Thanks,

    Brenda



  • 14.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-10-2017 05:28 AM
    I will be calling in. Just need the details.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:27 AM
    To: PAC-NW_List@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST? Please confirm your attendance.

    Thanks,

    Brenda



  • 15.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-10-2017 05:29 AM
    Do you guys want me to create a Webex?

    From: Garrett Mark [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:28 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I will be calling in. Just need the details.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:27 AM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST? Please confirm your attendance.

    Thanks,

    Brenda



  • 16.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-10-2017 05:42 AM
    I don’t have the authority to speak for others in this group, but I wouldn’t mind if you did Jennifer ☺

    Thank you,


    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:29 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Do you guys want me to create a Webex?

    From: Garrett Mark [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:28 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I will be calling in. Just need the details.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:27 AM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST? Please confirm your attendance.

    Thanks,

    Brenda



  • 17.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-10-2017 05:53 AM
    Just chiming in to this thread! We’re a custom manufacturer who deals with a lot of the issues you’re discussing:

    · Non-Linear job routing

    · Undefined MOMs at time of production.

    We’ve got a couple homebrew solutions, but I’m always interested in learning more from other users (and sharing our own solutions!).

    After the WebEx if anyone wants to meet up and discuss the issue, I’d love to join. DKT

    David King Traub
    Chief Operating Officer
    Rainier Industries | Seattle, WA
    425-981-1262 | DavidKT@Rainier.com<mailto:DavidKT@Rainier.com>

    From: Tony Holiday [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:42 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I don’t have the authority to speak for others in this group, but I wouldn’t mind if you did Jennifer ☺

    Thank you,


    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:29 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Do you guys want me to create a Webex?

    From: Garrett Mark [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:28 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I will be calling in. Just need the details.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:27 AM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST? Please confirm your attendance.

    Thanks,

    Brenda



  • 18.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-10-2017 06:07 AM
    So we don’t run into seat limitations I’ve setup a Webinar. It sounds like quite a few are interested in this topic.


    Please add this to your calendar if you plan on attending. Pre-registration is not needed.


    Event:

    PACNW Virtual Meeting - Custom Manufacturing

    Start Event Now

    You can start the event by clicking Start Now.










    Send Event Emails

    You can send event emails by clicking Send Emails.













    Event address for attendees:

    https://singularevents.webex.com/singularevents/onstage/g.php?MTID=e4bbedadddf53746e4757168d74520231





    Date and time:

    Wednesday, February 15, 2017 9:00 am
    Pacific Standard Time (San Francisco, GMT-08:00)

    Duration:

    1 hour

    Description:

    This will be an informal roundtable session for the Pacific Northwest EUG to discuss the nuances of Custom Manufacturing and how to configure Epicor to fit.


    Event number:

    664 655 223

    Event password:

    pacnw





    Panelist(s) Info:



    Panelist(s) password:

    Audio conference:

    To receive a call back, provide your phone number when you join the event, or call the number below and enter the access code.

    USA Toll Free

    1-844-740-1264

    USA Toll

    12404540879

    Show all global call-in numbers<https://singularevents.webex.com/cmp3100/webcomponents/widget/globalcallin/globalcallin.do?siteurl=singularevents&serviceType=EC&eventID=494560937&tollFree=1>

    Show toll-free dialing restrictions<https://www.webex.com/pdf/tollfree_restrictions.pdf>

    Access code: 664 655 223








    JENNIFER MESIANO
    President
    [9a885f_14a8cc8798524c6198f25fb51f871382-mv2]

    Mobile: 210-740-5942
    www.singularcs.comhttp://www.singularcs.com



    [CIOReview]



    From: David Traub [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:53 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Just chiming in to this thread! We’re a custom manufacturer who deals with a lot of the issues you’re discussing:

    * Non-Linear job routing
    * Undefined MOMs at time of production.

    We’ve got a couple homebrew solutions, but I’m always interested in learning more from other users (and sharing our own solutions!).

    After the WebEx if anyone wants to meet up and discuss the issue, I’d love to join. DKT

    David King Traub
    Chief Operating Officer
    Rainier Industries | Seattle, WA
    425-981-1262 | DavidKT@Rainier.com<mailto:DavidKT@Rainier.com>

    From: Tony Holiday [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:42 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I don’t have the authority to speak for others in this group, but I wouldn’t mind if you did Jennifer ☺

    Thank you,


    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:29 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Do you guys want me to create a Webex?

    From: Garrett Mark [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:28 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I will be calling in. Just need the details.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:27 AM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST? Please confirm your attendance.

    Thanks,

    Brenda



  • 19.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-10-2017 08:44 AM
    Jennifer:

    Thank you for setting up the Webinar.

    Kyle Cannon
    Sr. Customer Account Manager
    O: 949.585.4347
    M: 949.444.8687<tel:949.444.8687>
    E-Mail: kcannon@epicor.com<mailto:kcannon@epicor.com>
    www.epicor.comhttp://www.epicor.com


    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 10:07 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    So we don’t run into seat limitations I’ve setup a Webinar. It sounds like quite a few are interested in this topic.


    Please add this to your calendar if you plan on attending. Pre-registration is not needed.


    Event:

    PACNW Virtual Meeting - Custom Manufacturing

    Start Event Now

    You can start the event by clicking Start Now.










    Send Event Emails

    You can send event emails by clicking Send Emails.













    Event address for attendees:

    https://singularevents.webex.com/singularevents/onstage/g.php?MTID=e4bbedadddf53746e4757168d74520231





    Date and time:

    Wednesday, February 15, 2017 9:00 am
    Pacific Standard Time (San Francisco, GMT-08:00)

    Duration:

    1 hour

    Description:

    This will be an informal roundtable session for the Pacific Northwest EUG to discuss the nuances of Custom Manufacturing and how to configure Epicor to fit.


    Event number:

    664 655 223

    Event password:

    pacnw





    Panelist(s) Info:



    Panelist(s) password:

    Audio conference:

    To receive a call back, provide your phone number when you join the event, or call the number below and enter the access code.

    USA Toll Free

    1-844-740-1264

    USA Toll

    12404540879

    Show all global call-in numbers<https://singularevents.webex.com/cmp3100/webcomponents/widget/globalcallin/globalcallin.do?siteurl=singularevents&serviceType=EC&eventID=494560937&tollFree=1>

    Show toll-free dialing restrictions<https://www.webex.com/pdf/tollfree_restrictions.pdf>

    Access code: 664 655 223








    JENNIFER MESIANO
    President
    [9a885f_14a8cc8798524c6198f25fb51f871382-mv2]

    Mobile: 210-740-5942
    www.singularcs.comhttp://www.singularcs.com



    [CIOReview]



    From: David Traub [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:53 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Just chiming in to this thread! We’re a custom manufacturer who deals with a lot of the issues you’re discussing:

    * Non-Linear job routing
    * Undefined MOMs at time of production.

    We’ve got a couple homebrew solutions, but I’m always interested in learning more from other users (and sharing our own solutions!).

    After the WebEx if anyone wants to meet up and discuss the issue, I’d love to join. DKT

    David King Traub
    Chief Operating Officer
    Rainier Industries | Seattle, WA
    425-981-1262 | DavidKT@Rainier.com<mailto:DavidKT@Rainier.com>

    From: Tony Holiday [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:42 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I don’t have the authority to speak for others in this group, but I wouldn’t mind if you did Jennifer ☺

    Thank you,


    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:29 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Do you guys want me to create a Webex?

    From: Garrett Mark [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:28 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I will be calling in. Just need the details.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:27 AM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST? Please confirm your attendance.

    Thanks,

    Brenda



  • 20.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-13-2017 04:01 AM
    Thanks Jennifer. I and maybe some others at Electroimpact will be joining the call.

    -Todd Caughey


    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 10:07 AM
    To: pac-nw_list@list.epicorusers.org
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    So we don’t run into seat limitations I’ve setup a Webinar. It sounds like quite a few are interested in this topic.


    Please add this to your calendar if you plan on attending. Pre-registration is not needed.


    Event:

    PACNW Virtual Meeting - Custom Manufacturing

    Start Event Now

    You can start the event by clicking Start Now.










    Send Event Emails

    You can send event emails by clicking Send Emails.













    Event address for attendees:

    https://singularevents.webex.com/singularevents/onstage/g.php?MTID=e4bbedadddf53746e4757168d74520231





    Date and time:

    Wednesday, February 15, 2017 9:00 am
    Pacific Standard Time (San Francisco, GMT-08:00)

    Duration:

    1 hour

    Description:

    This will be an informal roundtable session for the Pacific Northwest EUG to discuss the nuances of Custom Manufacturing and how to configure Epicor to fit.


    Event number:

    664 655 223

    Event password:

    pacnw





    Panelist(s) Info:



    Panelist(s) password:

    Audio conference:

    To receive a call back, provide your phone number when you join the event, or call the number below and enter the access code.

    USA Toll Free

    1-844-740-1264

    USA Toll

    12404540879

    Show all global call-in numbers<https://singularevents.webex.com/cmp3100/webcomponents/widget/globalcallin/globalcallin.do?siteurl=singularevents&serviceType=EC&eventID=494560937&tollFree=1>

    Show toll-free dialing restrictions<https://www.webex.com/pdf/tollfree_restrictions.pdf>

    Access code: 664 655 223








    JENNIFER MESIANO
    President
    [9a885f_14a8cc8798524c6198f25fb51f871382-mv2]

    Mobile: 210-740-5942
    www.singularcs.comhttp://www.singularcs.com



    [CIOReview]



    From: David Traub [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:53 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Just chiming in to this thread! We’re a custom manufacturer who deals with a lot of the issues you’re discussing:

    * Non-Linear job routing
    * Undefined MOMs at time of production.

    We’ve got a couple homebrew solutions, but I’m always interested in learning more from other users (and sharing our own solutions!).

    After the WebEx if anyone wants to meet up and discuss the issue, I’d love to join. DKT

    David King Traub
    Chief Operating Officer
    Rainier Industries | Seattle, WA
    425-981-1262 | DavidKT@Rainier.com<mailto:DavidKT@Rainier.com>

    From: Tony Holiday [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:42 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I don’t have the authority to speak for others in this group, but I wouldn’t mind if you did Jennifer ☺

    Thank you,


    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:29 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Do you guys want me to create a Webex?

    From: Garrett Mark [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:28 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I will be calling in. Just need the details.

    Best,

    Garrett Mark
    Production Supervisor
    [access logo 50 percent]
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:27 AM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST? Please confirm your attendance.

    Thanks,

    Brenda



  • 21.  RE: Are there any custom manufacturers in this group using Epicor?

    Posted 02-15-2017 02:44 AM
    Just a reminder everyone that this is today.

    Jennifer Mesiano

    On Feb 13, 2017, at 10:01 AM, Todd Caughey <pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>> wrote:

    Thanks Jennifer. I and maybe some others at Electroimpact will be joining the call.

    -Todd Caughey


    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 10:07 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    So we don’t run into seat limitations I’ve setup a Webinar. It sounds like quite a few are interested in this topic.


    Please add this to your calendar if you plan on attending. Pre-registration is not needed.


    Event:

    PACNW Virtual Meeting - Custom Manufacturing

    Start Event Now

    You can start the event by clicking Start Now.










    Send Event Emails

    You can send event emails by clicking Send Emails.













    Event address for attendees:

    https://singularevents.webex.com/singularevents/onstage/g.php?MTID=e4bbedadddf53746e4757168d74520231





    Date and time:

    Wednesday, February 15, 2017 9:00 am
    Pacific Standard Time (San Francisco, GMT-08:00)

    Duration:

    1 hour

    Description:

    This will be an informal roundtable session for the Pacific Northwest EUG to discuss the nuances of Custom Manufacturing and how to configure Epicor to fit.


    Event number:

    664 655 223

    Event password:

    pacnw





    Panelist(s) Info:



    Panelist(s) password:

    Audio conference:

    To receive a call back, provide your phone number when you join the event, or call the number below and enter the access code.

    USA Toll Free

    1-844-740-1264

    USA Toll

    12404540879

    Show all global call-in numbers<https://singularevents.webex.com/cmp3100/webcomponents/widget/globalcallin/globalcallin.do?siteurl=singularevents&serviceType=EC&eventID=494560937&tollFree=1>

    Show toll-free dialing restrictions<https://www.webex.com/pdf/tollfree_restrictions.pdf>

    Access code: 664 655 223








    JENNIFER MESIANO
    President
    <image007.jpg>

    Mobile: 210-740-5942
    www.singularcs.comhttp://www.singularcs.com



    <image008.jpg>



    From: David Traub [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:53 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Just chiming in to this thread! We’re a custom manufacturer who deals with a lot of the issues you’re discussing:

    * Non-Linear job routing
    * Undefined MOMs at time of production.

    We’ve got a couple homebrew solutions, but I’m always interested in learning more from other users (and sharing our own solutions!).

    After the WebEx if anyone wants to meet up and discuss the issue, I’d love to join. DKT

    David King Traub
    Chief Operating Officer
    Rainier Industries | Seattle, WA
    425-981-1262 | DavidKT@Rainier.com<mailto:DavidKT@Rainier.com>

    From: Tony Holiday [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:42 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I don’t have the authority to speak for others in this group, but I wouldn’t mind if you did Jennifer ☺

    Thank you,


    Tony Holiday
    Business System Analyst
    22425 East Appleway Avenue, #11
    Liberty Lake, WA 99019
    509.921.7447 :: www.telect.comhttps://www.telect.com
    From: Jennifer Mesiano [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:29 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    Do you guys want me to create a Webex?

    From: Garrett Mark [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 11:28 AM
    To: pac-nw_list@list.epicorusers.org<mailto:pac-nw_list@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?

    I will be calling in. Just need the details.

    Best,

    Garrett Mark
    Production Supervisor
    <image009.jpg>
    917 134th Street SW | Unit A1 | Everett, WA 98204
    Cell: 425-761-2481| Office: 425-582-8674 Ext-121

    From: Brenda Lee [mailto:pac-nw_list@list.epicorusers.org]
    Sent: Friday, February 10, 2017 9:27 AM
    To: PAC-NW_List@list.epicorusers.org<mailto:PAC-NW_List@list.epicorusers.org>
    Subject: [PAC-NW_List] - RE: Are there any custom manufacturers in this group using Epicor?


    Just following up.... do we have a confirmed conference call for Wednesday, Feb 15 at 9am PST? Please confirm your attendance.

    Thanks,

    Brenda



Related Content